Municipal Sewage Treatment System
2.1 Reinforced Concrete Sewage Treatment System
Type of Treatment Process :
1) Extended Aeration (EA) System
2) Sequencing Batch Reactor (SBR) System
3) Upgrading of Oxidation Pond to Aerated Lagoon
4) Retrofit Of Existing Old Plant to Required New Design
5) Pumping Station
2.2 Mobile Dewatering Unit (MDU).
Type of Treatment Process :
1) First and Secondary Sreening.
2) Grit & Grease Removal.
3) Slurry Holding Tank.
4) Centrifugal Desander.
5) Centrifugal Decantor.
6) Automatic Dewatering Polymer Topup System.
7) vacuum Tanker Sludge Unloading Area.
2.3 SBR Sewage Treatment Plant
Type of Treatment Process :
1) Pump Sump.
2) First and Secondary Sreening.
3) Grit & Grease Removal.
4) SBR Tank.
5) Sludge Thickening.
6) Centrifugal Decantor.
7) Automatic Dewatering Polymer Topup System.
8) Chlorination Chamber..
2.4 Centralize Sewage Treatment Plant
Type of Treatment Process :
1) Pump Sump.
2) First and Secondary Sreening.
3) Grit & Grease Removal.
4) Modify OD Tank.
5) Sludge Thickening.
6) Centrifugal Decantor.
7) Automatic Dewatering Polymer Topup System.
8) Chlorination Chamber..
2.5 Packaged Fiberglass Reinforced Plastics Sewage Treatment System
EARTHCARE also supply Packaged Fiberglass Reinforced Plastics Sewage Treatment System including septic tanks. All these FRP tanks are prefabricated in factory so the time consuming civil & structural site work can be minimize meanwhile the material and labor cost also can be reduced.
All these system are pre-approved by Jabatan Perkhidmatan Pembetungan (JPP) which can be used for varoius type of sewage treatment capacity.
Type of Treatment Process :
1) Pump Sump.
2) First and Secondary Sreening.
3) Grit & Grease Removal.
4) FRP Tank.
5) Sludge Thickening.
6) Sand Bed. |
